选择您的操作系统。
该软件更新程序针对用户所有的以上产品（“相关产品”），并且仅在用户接受了下列协议时提供。选择“接受”并单击“下载”，即表示您接受该协议的条款和条件。开始下载之前请确保您已理解该协议条款。
About this firmware update
This download provides software for upgrading D40 A firmware to v1.12. The camera’s B firmware must be Ver. 1.11 to upgrade A firmware to Ver. 1.12. Be aware that proper operation of your D40 is not guaranteed with the combination of A firmware Ver. 1.12 and B firmware Ver. 1.00 or Ver. 1.10.
The following issues has been resolved in A firmware version 1.12.
With firmware Ver. 1.11 and earlier, the number of images that could be captured (battery performance) when an EN-EL9a was used was less than when an EN-EL9 was used. By upgrading A firmware to Ver. 1.12, EN-EL9a performance is maximized so that more images can be captured (battery performance) when an EN-EL9a is used than when an EN-EL9 is used.
Number of shots possible (battery performance) with EN-EL9a (1,080 mAh)
- Single-frame shooting mode: Approximately 510 shots (with testing according to CIPA standards*)
- Continuous shooting mode: Approximately 2,400 shots (with testing according to Nikon standards*)
*See the D40 user’s manual for details on test conditions.
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your D40, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1.Turn the D40 on.
2. Press the MENU button and select Firmware version from the setup menu. The camera's firmware version will be displayed.
3. Turn the D40 off.
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download the firmware file from the link below.
2. Double click the downloaded F-D40-v112W.exe file which will create a folder titled D40 Update, this folder will contain the 'AD400112.bin' firmware file.
3. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "CSM/Setup menu". Select the "Full" menu option and press OK.
4. Format an approved memory card in the camera.
5. Connect D40 to your computer (in MSC Mass Storage USB mode) or use a SD Card Reader.
6. Copy the downloaded 'AD400112.bin' (A firmware) file to the top level of the memory card.
7. Disconnect the camera from the computer (if using an SD card reader then insert the memory card to the camera)
8. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "Firmware Ver".
9. Select "Version Up" and follow the camera's on-screen menus. Do not turn the camera off during upgrade.
10. When a message displays that the upgrade is complete, turn the camera off.
11. Re-format the memory card.
For detailed instructions on how to install this firmware update click here
System requirements
System requirements |
5MB or more free hard-disk space. 32MB or more free RAM. Built-in USB port. |
Download file |
F-D40-v112W.exe (220 KB) |
About this firmware update
This download provides software for upgrading D40 A firmware to v1.12. The camera’s B firmware must be Ver. 1.11 to upgrade A firmware to Ver. 1.12. Be aware that proper operation of your D40 is not guaranteed with the combination of A firmware Ver. 1.12 and B firmware Ver. 1.00 or Ver. 1.10.
The following issues has been resolved in A firmware version 1.12
With firmware Ver. 1.11 and earlier, the number of images that could be captured (battery performance) when an EN-EL9a was used was less than when an EN-EL9 was used. By upgrading A firmware to Ver. 1.12, EN-EL9a performance is maximized so that more images can be captured (battery performance) when an EN-EL9a is used than when an EN-EL9 is used.
Number of shots possible (battery performance) with EN-EL9a (1,080 mAh)
- Single-frame shooting mode: Approximately 510 shots (with testing according to CIPA standards*)
- Continuous shooting mode: Approximately 2,400 shots (with testing according to Nikon standards*)
*See the D40 user’s manual for details on test conditions.
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your D40, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1.Turn the camera on.
2. Press the MENU button and select Firmware version from the setupmenu. The camera's firmware version will be displayed.
3. Turn the camera off.
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download the file F-D40-V112M.dmg from the link below.
2. Double click the F-D40-V112M.dmg icon to mount the disk image titled F-D40-V112M. The folder titled D40 Update will be created inside the disc image which contains the firmware file (AD400112.bin)
3. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "CSM/Setup menu". Select the "Full" menu option and press OK.
4. Format an approved memory card in the camera.
5. Connect the D40 to a computer (in MSC Mass Storage USB mode) or use a SD Card Reader.
6. Copy the downloaded file 'AD400112.bin' to the top level of the memory card.
7. Disconnect the camera from the computer (if using an SD card reader then insert the memory card to the camera)
8. Turn the camera on, press the "Menu" button, select the SETUP menu and then select "Firmware Ver".
9. Select "Version Up" and follow the camera's on-screen menus. Do not turn the camera off during upgrade.
10. When a message displays that the upgrade is complete, turn the camera off.
11. Re-format the memory card.
For more detailed instructions on how to install this firmware update click here
System requirements
System requirements |
Operating System: Mac OS X v10.1.5-10.6 |
Download file |
F-D40-v112M.dmg (9.26 MB) |
PDF文件可使用免费的Adobe® Reader®软件进行查看。
下载Adobe® Reader®。