尼康 Nikon COOLPIX L110固件下载 轻便型数码照相机COOLPIX L110 win版 os版 升级 刷机Ver.1.4 F-L110-V14M.dmg(约18.01 MB) 新版本 windows MacOS 免费

更新时间2010/06/29 下载次数5928 下载

站长跪谢,感恩支持!

关闭弹层
尼康公司拥有著作权
下载尼康数码产品的固件（固件是指控制照相机和其他设备的内置软件）。若要查看说明、注意事项以及下载和安装指示说明，请单击“查看下载页面”。请注意，某些固件更新可能需要读卡器或其他设备。指示说明可在下载页面中查找。

COOLPIX L110 固件

选择您的操作系统。

  • Windows
  • Mac OS

该软件更新程序针对用户所有的以上产品（“相关产品”），并且仅在用户接受了下列协议时提供。选择“接受”并单击“下载”，即表示您接受该协议的条款和条件。开始下载之前请确保您已理解该协议条款。

About this firmware update

This service provides the software for upgrading the COOLPIX L110 firmware to v1.4.

The following improvements have been made in version 1.4.

-  An issue that sometimes caused pictures taken under incandescent coloured fluorescent lighting with White balance set to Auto to have a yellowish cast has been resolved.


How to confirm your cameras current firmware version

If the latest firmware version is already installed on your L110, you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

1. Turn on the camera.
2. Press the MENU button to display the menu screen.  
3. Select the Setup Menu.  
4. Select Firmware version from the setup menu.
5. The camera's firmware version will be displayed.  
6. Turn off the camera.


Quick guide for download and installing this firmware update
 Please note that when firmware is updated on the camera any images stored on the internal memory are erased.  Please ensure that any images on the camera are copied to a computer or memory card before proceding with this update.

Power the camera from AC adapter unit or use a fully charged battery.

1. Create a new folder on your computer's hard drive.
2. Click the link at the bottom of this page to download the .EXE file to the new folder created.
3. Run the .EXE file from the Windows Explorer to create a folder which contains a folder called 'firmware' 
4. Use a card reader or similar device to copy the 'firmware' folder to a formatted SD memory card.    
5. Insert the memory card containing the 'firmware' folder into the camera and turn on the camera.
6. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.    
7. After the upgrade is complete, turn the camera off and remove the memory card.
8. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded. 

For detailed instructions on how to install this firmware update click here


System requirements

System requirements

5MB or more free hard-disk space. 32MB or more free RAM. Built-in USB port.
Microsoft Windows 7 (all editions)
Microsoft Windows Vista (all editions)
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Microsoft Windows 2000 Professional
Microsoft Windows ME
Microsoft Windows 98 Second Edition (SE)
*SD Card reader or computer with built-in SD memory card slot required.
Download file F-L110-V14W.exe (3.57 MB)
Contains the following file: firmware.bin

About this firmware update

This service provides the software for upgrading the COOLPIX L110 firmware to v1.4.

The following improvements have been made in version 1.4.

-   An issue that sometimes caused pictures taken under incandescent coloured fluorescent lighting with White balance set to Auto to have a yellowish cast has been resolved.

How to confirm your cameras current firmware version

If the latest firmware version is already installed on your L110, you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.

1. Turn on the camera.
2. Press the MENU button to display the menu screen.  
3. Select the Setup Menu.  
4. Select Firmware version from the setup menu.
5. The camera's firmware version will be displayed.  
6. Turn off the camera.


Quick guide for download and installing this firmware update
Please note that when firmware is updated on the camera any images stored on the internal memory are erased.  Please ensure that any images on the camera are copied to a computer or memory card before proceding with this update.

Power the camera from AC adapter unit or use a fully charged battery.

1. Click the link at the bottom of this page to download the .DMG file which contains the firmware.
2. Double-click the .DMG file to display a folder which contains a folder called 'firmware'.
3. Use a card reader or similar device to copy the 'firmware' folder to a formatted SD memory card.    
4. Insert the memory card containing the 'firmware' folder into the camera and turn on the camera.
5. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.    
6. After the upgrade is complete, turn the camera off and remove the memory card.
7. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded. 

For detailed instructions on how to install this firmware update click here.       


System requirements

System requirements Mac OSX 10.1.5 - 10.6.3
1-GHz or better PowerPC G4 / PowerPC G5 / Intel Core series / Xeon series
5 MB or more free hard-disk space.
32 MB or more free RAM. Built-in USB port.
*SD Card reader or computer with built-in SD memory card slot required.
Download file F-L110-V14M.dmg (18.01 MB)
Contains the following file: firmware.bin

 

较终用户许可协议

  • 下载

    F-L110-V14M.dmg
    (约18.01 MB)

  • 下载

    F-L110-V14W.exe
    (约3.57 MB)

该下载服务不适用于您的设备。

您可将该下载链接以电子邮件的形式发给自己以在其他设备上使用。

history.back();" class="mod-button-plane back">返回

PDF文件可使用免费的Adobe® Reader®软件进行查看。
下载Adobe® Reader®。