This software package allows you to update your Blackmagic Camera to the latest software release for new features, bug fixes and other enhancements.
The software installer no longer installs the Desktop Video or UltraScope applications and they will need to be downloaded separately from the Blackmagic Design website: https://www.blackmagicdesign.com/support
To use UltraScope via Thunderbolt with Blackmagic Cinema Camera or Production Camera 4K, download and install the Blackmagic UltraScope software. If you want to use Media Express with the supported cameras, download and install the Blackmagic Desktop Video software.
Please ensure that your device is plugged into mains power before running the software update. To update Blackmagic Camera Fiber Converter you will need to ensure that the unit is powered from the camera using the URSA 12V power supply rather than SMPTE fiber during the update.
Please update your camera before attaching the Blackmagic Camera Battery Grip.
For updating Blackmagic Cameras from Camera 4.0 or above it is advisable to export your presets and LUTs onto a card as they will be removed during this update.
New features for Pocket Cinema Camera 6K and 4K
No new features in 6.9 for other camera models.
What’s new in Blackmagic RAW 1.7
Before installing the software, we recommend that you run "Uninstall Blackmagic Camera Setup” first.
While installing Camera Update on URSA Mini and URSA Mini Pro you may notice a pause around the 10% mark in the install process, this is normal and will continue installing after around 20 seconds.
While installing Camera Update on Pocket Cinema Camera 4K you may notice a pause around the 70% mark in the install process, this is normal. Please do not power off the camera as it may still be in the middle of the update process. When the update is completed, the camera will restart into its normal operating state.
After loading the software on the Blackmagic Cinema Camera PL, EF or MFT, you may notice a slight flickering on the built-in LCD screen. This is normal and expected behavior. The flickering will go away after a few minutes of operation.
Some applications may use third party code under license. For details please refer to the included "Third Party Licenses.rtf" document.
© 2020 Blackmagic Design Pty. Ltd. All rights reserved. Blackmagic Design, Blackmagic, DeckLink, Multibridge, HDLink, Videohub, and "Leading the creative video revolution" are trademarks of Blackmagic Design Pty. Ltd., registered in the U.S.A and other countries.
Updated March 29, 2020.
关于Blackmagic Camera Utility
该软件包可让您将Blackmagic Camera更新到较新版本，以获取新功能，错误修复和其他增强功能。
该软件安装程序不再安装Desktop Video或UltraScope应用程序，需要从Blackmagic Design网站单独下载它们：https : //www.blackmagicdesign.com/support
要通过Thunderbolt将UltraScope与Blackmagic Cinema Camera或Production Camera 4K一起使用，请下载并安装Blackmagic UltraScope软件。如果要在支持的摄像机上使用Media Express，请下载并安装Blackmagic Desktop Video软件。
在运行软件更新之前，请确保您的设备已插入主电源。要更新Blackmagic摄像机光纤转换器，您需要确保在更新过程中使用URSA 12V电源而不是SMPTE光纤从摄像机为设备供电。
在安装Blackmagic相机电池手柄之前，请先更新相机。
要从Camera 4.0或更高版本更新Blackmagic Cameras，建议将您的预设和LUT导出到卡上，因为在此更新过程中会删除它们。
Pocket Cinema Camera 6K和4K的新功能
6.9中没有其他相机型号的新功能。
Blackmagic RAW 1.7的新功能
在安装软件之前，我们建议您首先运行“卸载Blackmagic Camera Setup”。
在URSA Mini和URSA Mini Pro上安装Camera Update时，您可能会在安装过程中注意到10％左右的停顿，这是正常现象，并且会在大约20秒后继续安装。
在Pocket Cinema Camera 4K上安装Camera Update时，您可能会在安装过程中注意到70％左右的停顿，这是正常现象。请不要关闭相机电源，因为它可能仍在更新过程中。更新完成后，摄像机将重新启动进入其正常操作状态。
在Blackmagic Cinema Camera PL，EF或MFT上加载软件后，您可能会注意到内置LCD屏幕上出现轻微闪烁。这是正常现象和预期行为。操作几分钟后，闪烁将消失。
某些应用程序可能会在许可下使用第三方代码。有关详细信息，请参阅随附的“第三方Licenses.rtf”文档。
©2020 Blackmagic Design Pty。Ltd.保留所有权利。Blackmagic Design，Blackmagic，DeckLink，Multibridge，HDLink，Videohub和“引领创意视频革命”是Blackmagic Design Pty。Ltd.在美国和其他国家的注册商标。
2020年3月29日更新。