松下 AU-XPD3MC P2 读卡器 驱动器 高速Thunderbolt?3接口的“expressP2驱动器” 提高了4K/高帧频视频制作工作流程的速率

7500.00

北京风清扬摄影器材有限公司 销售电话 18612707474

 

卡槽可支持expressP2卡、P2卡或MicroP2卡(需配置适配器)。

AU-XPD3MC有助于提高Varicam 4K/高帧频视频制作工作流程的速率。

 

"expressP2 drive" with High-Speed Thunderbolt™ 3 Interface Speeds up Video Production Workflow of 4K/high-frame-rate

The AU-XPD3 Memory Card Drive "expressP2 drive" uses the Thunderbolt™ 3 interface to achieve high speed data transfer. The expressP2 card B series are developed as recording media for the Panasonic VariCam series camera, due to record 4K/highframe-rate video. The AU-XPD3 takes full advantage of the high data transfer performance (maximum 10 Gbps*) of this media, thus achieving about four times*1 faster transfer speed than its predecessor, the AU-XPD1/USB 3.0. When two AU-XPD3 units are daisy-chained, data can be transferred at an increased speed of 17.6 Gbps.*

The card slot accommodates an expressP2 card, P2 card or microP2 card (adaptor required). The AU-XPD3 contributes to speedier 4K/high-frame-rate video production workflows using VariCam.

High-speed Thunderbolt™ 3 Interface

The high-speed Thunderbolt™ 3 interface incorporated in the AU-XPD3 is capable of transferring data at a maximum speed of 40 Gbps, which is eight times faster than the transfer speed of USB 3.0, and also supports daisy-chain connection of up to six devices.

As a next-generation standard interface, it is used with many Windows PCs and Mac computers, and its application is expanding widely into various products, such as hard-disk drives and other storage devices as well as Thunderbolt™ 2 conversion adaptors.

Transfer Speed of 10 Gbps* Reduces Transfer Time to 1/4

The Thunderbolt™ 3 interface maximizes the high data transfer performance of the expressP2 card B series. The maximum transfer speed of 10 Gbps* (measured value) enables offloading of 512 GB content (AVC-Intra 4K422/24p recording of about three hours) in approximately seven minutes.*

Increasing Transfer Speed with a Daisy-chain Connection

The AU-XPD3 supports daisy-chain connection. When two expressP2 drive units are used to simultaneously access two expressP2 cards, the transfer speed increases to 17.6 Gbps* maximum (measured value). This enables offloading of 1 TB content (about six hours) in approximately eight minutes.*

Supports expressP2, P2 and microP2 Cards

The card slot (one slot) accommodates an expressP2 card, P2 card or microP2 card (adaptor required). Thus, the AU-XPD3 can be used not only with the VariCam series but also with the P2HD series.*

Specifications

Specifications
PowerDC 16 V 3.1 A
AC AdaptorInput : AC 100 V - 240 V, 50 Hz/60 Hz, 1.5 A - 0.8 A
Output : DC 16 V, 3.75 A
WeightApprox. 1.2 kg (2.65 lb)
Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity10 % to 85 % (no condensation)
Dimensions (W x H x D)126 mm x 62 mm x 216.5 mm (4-31/32 inches x 2-7/16 inches x 8-17/32 inches)
(excluding protrusion)
Connector ConfigurationUSB Type-C connector x 2
Card SlotPC card slot x 1 (CardBus/PCI Express Base Specification)
PC Operation Requirements
Supported OSMicrosoft® Windows 10 (64 bit), macOS 10.12
Main Memory4 GB is recommended
InterfaceThunderbolt™ 3 compliant

SDHC logo and SDXC logo are trademarks of SD-3C, LLC.
macOS is trademarks of Apple Inc., registered in the U.S. and other countries.
Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other countries.
Microsoft, Windows are registered trademarks of Microsoft corporation.